Contact – Cell Site Automation, Remote Equipment Monitoring, Generators, Access Control, Site Security
From Asentria Portal

The 4ES expansion card can be added to any open expansion slot that will increase the number of EventSensor ports from one to four maximum

Explains the number of CDRs that will fit in the T850 buffer

MIB files for SNMP messaging configurations.

This note briefly describes how to configure SiteBoss products to generate and use Intermapper SNMP Probes.

Calibrating an Analog Input is normally done at Asentria before the unit or slot card ships. But if a card is in need of calibrating in the field these steps can be taken to get the card back in tolerance.

This note briefly describes how to clear the slots in an Asentria unit so that an unrecognized wireless modem will be recognized by the unit.

This Feature Guide covers the basics of how to manage and control your Asentria Unit using the Command Line Interface.

This table lists the Command Set for the SiteBoss and TeleBoss units.

Windows Configuration Utility, version 5.01c. (Note: The same program is used for the S410 and S412 for configuration.)

Feature guide that covers configuring your SiteBoss or TeleBoss to route traffic between two Ethernet ports

This article describes how to configure certain SiteBoss or TeleBoss units to receive incoming SNMP traps from other devices and convert those traps to a data alarm upon which some other event action can be taken.

This Feature Guide discusses the provision of Customizable Command Prompt Feature Guide in conjunction with a Asentria product.

Info rolled into Data Alarms feature guide

Some commands that exit for the TeleBoss data buffers are not on the SiteBoss products. This article explains how to delete the contents of a File location in a SiteBoss.

This article gives instructions for connecting a laptop or a desk top computer directly to the Eth1 or Eth2 ports on a S550 or a T850.

This note briefly describes how to configure Dispatcher alarms in SiteBoss and TeleBoss products.

Instructions to clear an EventSensor ID should it become unresponsive after an upgrade or Firmware change.

This article explains the EventSensor MIB OIDs

This note briefly describes the method for quickly determining the OIDs for Asentria EventSensors in the MIBs for SNMP compliant Asentria products.

This Feature Guide gives the equation to determine if your EventSensor string needs additional power to function as well as power supply options.

Wireless interface routing instructions when using the faster modem expansion card

This article describes how to use SNMP to control a firmware upgrade on an Asentria SiteBoss or TeleBoss.

Instructions for updating the firmware on a SiteBoss or TeleBoss.

How to use the Floating Decimal functionality in Siteboss Analog Sensors.

This article describes how to use the Button Unlock feature supported in some Asentria products.

This guide walks a user through setting up a 2048 bit RSA key.

Glossary of common industry terms and abbreviations.

Brief notes regarding securing the Audit Log on a SiteBoss or TeleBoss.

This note briefly describes the basic integration between Intermapper and Asentria SiteBoss monitoring devices.

JITC FW in the T850

How to Access a True JITC box

The default passwords for SL and DL products.

This is a list of equipment that has already had the work done to set up monitoring and/or control using SiteBoss controllers.

Brief instructions on how to load settings keys using a USB stick for units with a USB port.

Instructions on how to get compressed logs off an Asentria unit.

This guide describes how to configure No-Data, Scheduled, % full, and other Misc.alarms found in the TeleBoss and Siteboss products.

Feature guide that covers pass through settings and trouble shooting using SiteBoss and TeleBoss settings and features.

This document explains how to set up a PPP dialout session – specifically how to set up PPP dialout using a Win7 PC as the PPP/RAS server.

This Application Guide focuses on connecting to a SiteBoss or TeleBoss product via the available dial-up modem option using a Windows PC, a dial-up modem, and a standard phone line.

This feature enables you to network the unit with a another unit, a windows PC, or a linux PC, via the unit's I/O 2 serial port. There are two ways to operate this feature: use the unit as a host or as a client. Where the unit is the host/client, configure the other machine (the PPP peer) to be client/host.

These are instructions on how to recover audit records that have been retired by the unit but not yet copied over by newer records.

The Relay Application guide is a basic description of relay function with specific information on the type of relays in available in the SiteBoss products.

This article describes how to apply setting keys and firmware updates to multiple units rapidly, without requiring interaction with individual units.

This feature guide shows the pinout for our RJ45 Serial Ports on the TeleBoss and SiteBoss units. The DCE and DTE adapter wiring pin outs is also covered.

Explains the Serial Break RS-232 function.

This article gives specific instructions on how to connect a TeleBoss to a Serial PBX.

This is a quick test to ensure the serial ports are physically functional.

This is an explanation of the settings keys to lock the MLEU Wireless Modem in a specific cellular band.

Instructions for updating the firmware of a SiteBoss 220.

Instructions on updating the firmware of a SiteBoss 350.

Instructions on updating the firmware of a SiteBoss 450.

Instructions on updating the firmware of a SiteBoss 530.

Instructions on updating the firmware of a SiteBoss 550.

Instructions on updating the firmware of a SiteBoss 571.

Instructions on updating the firmware of a SiteBoss 572.

This document gives instructions on how to create a custom RJ45 console cable to connect one SiteBoss to another using the Serial Ports. The Serial Adapters that arrive with your SiteBoss can be used to connect them in the same way.

Type a brief description of the document that will display in the document listing page.

This note briefly describes how to configure certain SiteBoss or TeleBoss products that support SNMPv3 for secure SNMP management.

This feature guide explains how to setup and use SNMPv3 in units that support it.

Summary of changes in the SiteBoss and TeleBoss firmware.

Instructions for taking a TCP Log and getting it off the unit

Instructions on updating the firmware of a TeleBoss 820.

Instructions on updating the firmware of a TeleBoss 830.

Instructions on updating the firmware of a TeleBoss 850.

This note briefly describes how to configure No Data alarms in TeleBoss products.

This Feature Guide covers transferring files into and out of a SiteBoss or TeleBoss via the command line. It covers FTP, SCP as well as X,Y and Z modem transfers.

This note briefly describes how to configure certain SiteBoss or TeleBoss units to take SNMP traps captured from other devices and forward them over PPP when no Ethernet connection is available.

This document describes how to view buffered data for both the TeleBoss and SiteBoss products.

Type a brief description of the document that will display in the document listing page.

The purpose of the dual-SIM module is to support an alternate wireless provider in situations where a connection cannot be made with the primary wireless provider, or if a specified data limit is exceeded.

Alternative upgrade method for those that do not have an Ethernet option.

Zmodem download method instructions.