Contact – Cell Site Automation, Remote Equipment Monitoring, Generators, Access Control, Site Security
From Asentria Portal

The 4ES expansion card can be added to any open expansion slot that will increase the number of EventSensor

This documents explains the number of CDRs that will fit in the T850 buffer.

This document provides a listing of the MIB files for SNMP messaging configurations on Asentria products.

This document briefly describes how to configure SiteBoss products to generate and use Intermapper SNMP Probes.

Calibrating an Analog Input is normally done at Asentria before the unit or slot card ships. But if a card is in need of calibrating in the field these steps can be taken to get the card back in tolerance.

This document briefly describes how to clear the slots in an Asentria unit so that an unrecognized wireless modem will be recognized by the unit.

This table lists the Command Set for the SiteBoss and TeleBoss units.

This document describes a Windows Configuration Utility, version 5.01c.

This Feature Guide describes configuring a SiteBoss or TeleBoss to route traffic between two Ethernet ports.

This document describes how to configure certain SiteBoss or TeleBoss units to receive incoming SNMP traps from other devices and convert those traps to a data alarm upon which some other event action can be taken.

This Feature Guide discusses the provision of Customizable Command Prompt Feature Guide in conjunction with a Asentria product.

This article describes how site information is rolled into Data Alarms.

This document explains some commands that exit for the TeleBoss data buffers but are not on the SiteBoss products. This article explains how to delete the contents of a File location in a SiteBoss.

This article gives instructions for connecting a laptop or a desk top computer directly to the Eth1 or Eth2 ports on a S550 or a T850.

This document briefly describes how to configure Dispatcher alarms in SiteBoss and TeleBoss products.

This document includes instructions to clear an EventSensor ID, if it becomes unresponsive after an upgrade or Firmware change.

This article explains the EventSensor MIB OIDs

This manual provides Instruction in how to query the state of Event Sensors using SNMP MIB Browsing.

This Feature Guide gives the equation to determine if your EventSensor string needs additional power to function as well as power supply options.

This document explains wireless interface routing instructions when using the faster modem expansion card.

This article describes how to use SNMP to control a firmware upgrade on an Asentria SiteBoss or TeleBoss.

Instructions for updating the firmware on a SiteBoss or TeleBoss.

This Feature Guide describes how to use the Floating Decimal functionality in Siteboss Analog Sensors.

This article describes how to use the Button Unlock feature supported in some Asentria products.

This guide walks a user through setting up a 2048 bit RSA key.

This document contains common industry terms and abbreviation. Basic descriptive definitions have been provided to help increase understand and usage of Asentria SiteBoss products.

This document briefly describes how to secure the Audit Log on a SiteBoss or TeleBoss.

This document briefly describes the basic integration between Intermapper and Asentria SiteBoss monitoring devices.

This document pertains to the JITC firmware in Asentria's TeleBoss (T850).

This document explains how to access a True JITC box.

This article describes the default passwords for SL and DL products.

This is a list of equipment that has already had the work done to set up monitoring and/or control using SiteBoss controllers.

This document provides instructions on how to load settings keys onto a SiteBoss using a USB drive

This manual provides instruction regarding the creation and downloading of the LOG.TGZ log files.

This guide describes how to configure No-Data, Scheduled, % full, and other Misc.alarms found in the TeleBoss and Siteboss products.

This document describes how to configure open collector alarms with Asentria's contact closures.

This Feature Guide covers pass through settings and trouble shooting using SiteBoss and TeleBoss settings and features.

The Power Boss DC60 adds high-current switching capability to any Asentria Base Unit with an EventSensor port.

This document explains how to set up a PPP dialout session – specifically how to set up PPP dialout using a Win7 PC as the PPP/RAS server.

This Application Guide focuses on connecting to a SiteBoss or TeleBoss product via the available dial-up modem option using a Windows PC, a dial-up modem, and a standard phone line.

This feature enables you to network the unit with a another unit, a windows PC, or a linux PC, via the unit's I/O 2 serial port. There are two ways to operate this feature: use the unit as a host or as a client. Where the unit is the host/client, configure the other machine (the PPP peer) to be client/host. .

This document provides instructions on how to recover audit records that have been retired by the unit but not yet copied over by newer records.

The Relay Application guide is a basic description of relay function with specific information on the type of relays in available in the SiteBoss products.

This article describes how to apply setting keys and firmware updates to multiple units rapidly, without requiring interaction with individual units.

This feature guide shows the pinout for our RJ45 Serial Ports on the TeleBoss and SiteBoss units. The DCE and DTE adapter wiring pin outs is also covered.

This document explains the Serial Break RS-232 function in Asentria products.

This article gives specific instructions on how to connect a TeleBoss to a Serial PBX.

This demonstrates how to conduct a quick test to ensure the serial ports are physically functional.

This document provides an explanation of the settings keys to lock the MLEU Wireless Modem in a specific cellular band.

This document explains how to update the firmware of a SiteBoss 220.

This document explains how to update the firmware of a SiteBoss 350.

This document explains how to update the firmware of a SiteBoss 450.

This document explains how to update the firmware of a SiteBoss 530.

This document explains how to update the firmware of a SiteBoss 550.

This document explains how to update the firmware of a SiteBoss 571.

This document explains how to update the firmware of a SiteBoss 572.

This document gives instructions on how to create a custom RJ45 console cable to connect one SiteBoss to another using the Serial Ports.

This guide explains how the SNMP Product Number feature enables one product to look like another product from the perspective of the OID. This is achieved by changing the SNMP product number part of the OID.

This document briefly describes how to configure certain SiteBoss or TeleBoss products that support SNMPv3 for secure SNMP management.

This feature guide explains how to setup and use SNMPv3 in units that support it.

This manual provides basic installation and operation details the specified EventSensor products. For special features, use case examples, or application stories, see Manual Addenda or the KnowledgeBase.

Instructions for taking a TCP Log and getting it off the unit

This document explains how to update the firmware of a TeleBoss 830.

This document explains how to update the firmware of a TeleBoss 850.

This document briefly describes how to configure No Data alarms in TeleBoss products.

This Feature Guide covers transferring files into and out of a SiteBoss or TeleBoss via the command line. It covers FTP, SCP as well as X,Y and Z modem transfers.

This document briefly describes how to configure certain SiteBoss or TeleBoss units to take SNMP traps captured from other devices and forward them over PPP when no Ethernet connection is available.

This is a demonstration of how to setup and use contact closure inputs on a SiteBoss 550

This document describes how to view buffered data for both the TeleBoss and SiteBoss products.

This document explains the warranty agreement Asentria provides for it products.

This article describes the use and configuration of the EventSensor Reporting feature which allows one SiteBoss to report EventSensor data to a host SiteBoss.

This document explains an alternative upgrade method for Asentria products in cases where Ethernet is not an option.

This document provides instructions for using Zmodem to download files from Asentria products.